Master Bond-Metal Bonding Adhesive Replaces Rivets and Spot Welds
Master Bond's Supreme 11HT metal adhesive produces bonds with significantly high shear and high peel strengths while offering superior resistance to impact, thermal shock, vibration and fatigue cracking.

HACKENSACK, NJ, March 27, 2010 /24-7PressRelease/ -- Designed to replace rivets and spot welds in metal lap joints, structural adhesive Supreme 11HT produces tough and high strength bonds having excellent shear and peel strengths. Master Bond's innovative metal bonding adhesive is formulated for service from -100°F to over 400°F. It offers superior resistance to impact, thermal shock, vibration and fatigue cracking, while also maintaining moisture, creep, corrosion and thermal resistance. This two part metal bonding epoxy offers a relatively fast cure at room temperature, or a more rapid cure at elevated temperatures. 100% reactive, it does not contain any diluents, solvents or any hazardous ingredients.

Supreme 11HT is unique in the wide variety of different metals to which it offers outstanding adhesion. Its high strength bonds are remarkably resistant to chemicals including fuels, water, oil and many organic solvents even upon prolonged exposures. Significant metal bonding strength characteristics include tensile shear strength in excess of 2,300 psi and T-peel strength of 25 pli. Adhesion to brass, aluminum, Nitenol, glass, ceramics, vulcanized rubbers and many plastics is excellent. The hardened adhesive is a superior electrical insulator. Its imposing performance profile qualifies Supreme 11HT metal adhesive for use in difficult applications in the aerospace, electronic, electrical, appliance, automotive and chemical industries.

About Master Bond's Metal Bonding Adhesive:

Master Bond's array of metal adhesives and coatings for metal surfaces are effectively applied on dissimilar metal substrates. These include metals with different melting points which are difficult to bond by other joining technologies. High-strength and durable bonds can be developed for aluminum adhesive bonding as well as for cast iron, stainless steel, titanium, brass, chromium. Copper and stainless steel adhesive offers chemical and abrasion resistance as well as thermal shock and vibration durability for service in high and very low, cryogenic temperatures. Read more about Master Bond's adhesives for metal bonding: http://www.masterbond.com/lp/tabs/tp_bys_metalbonding.html or contact Technical Support. Phone: 201-343-8983 Fax: 201-343-2132 E-mail: technical@masterbond.com

Press Release Contact Information:

Rachel Ruchama
Master Bond Inc
Editorial Contact
154 Hobart St.
Hackensack, NJ
USA 07601
Voice: 201-343-8983
Fax: 201-343-2132
Website: Visit Our Website